preferential-lite
shadow

How To Use Potassium Chloride As Substitute For Salt In A Water Softener

Nearly after 20 years, potassium chloride has emerged as a substitute for sodium salts that were used since its inception. It was seen that little sodium was left in the water after the regeneration process. The same is with potassium but it is a healthy alternative for body and environment.

People suffering from high blood pressure are recommended to take low salts. A salt-based water softener is not recommended to them due to which salt in water. This issue can be trounced by using potassium salts. Even environment-friendly people should pick these salts instead. Ask dealers about the benefits it offers.

These salts can be used in any salt-based water softener system. It is recommended to buy the long-lasting quality system. Hence always get best water softeners compared before you buy.

Sodium Chloride Solution:

Since water softener’s inception, it has gained huge attention and salt is used as an agent for the regeneration process. A German Scientist Gans in 1905 that water could be softened via sodium chloride.

From the sodium was the standard choice for regeneration. However in the late 1980s as the market grew and health organizations enlighten the negative impacts of salts on the human body and environment scientist looked for alternatives.

Salt consumption got a major hike amid 1984 to 1999 and about 50% of the increase was estimated. These salts were discharged from home after the regeneration cycle which increased rapidly.

Further, it surfaced to high sodium intake that leads to hypertension, high blood pressure, etc. which diverted individuals interest to potassium usage.

An Alternative- Potassium Chloride:

To reduce the salt discharge in an environment that was spoiling soil and health, water softener manufacturers have addressed the issue and started taking initiatives.

However, new water softener technology isn’t the sole solution where brine discharge is a major concern. Here, potassium comes into rescue. It may help in decreasing salt intake and also adding an essential nutrient.

Environmental Impact:

Potassium is a healthy element for the human body and plants. Hence it is considered good from every perspective. Using potassium will decrease the salt discharge via a brine tank and over a period can overcome increased sodium issues.

Potassium chloride is the source of potash fertilizer. As per reports of 1994/95 Canada Agriculture involves 94% of potash domestically. This was calculated in the year 1996 to check what is the average use of potash in the world? It was 20,550,000 tons which clearly indicated the benefits of potassium.

Health Benefits:

Potassium is good for health which is not produced by the human body itself. It needs to be taken via a balanced diet. About 11% of potassium chloride is required by our body as a daily intake.

But the question is in this hectic and fast moving life do we actually pay attention to supplements intake? We usually binge on junk and fast food available to save time. Drinking potassium water could help you with one supplement fulfillment without changing your routine. When we drink 8 glasses of water per day containing potassium with 15 grains hardness it fulfills the requirement.

Low Sodium Impact:

Additionally, potassium chloride reduces sodium content in water up to 90 percent which is best for people prescribed low sodium intakes. Also, doctors say that sodium should be consumed in limits as it may have negative effects on the body.

Conclusion:

Hope we clarify all your doubts about using potassium chloride as an alternative to sodium salts. If you still have any fear regarding KCl read the relevant questions mentioned below.

Do not forget to share your valuable suggestions write to us in the comment box.

Frequently Asked Questions:

  • Do I need any specific water softener system to use Potassium Chloride as salt?

Ans: No, any standard salt based softener will work well with potassium chloride.

  • Any specific changes to be made in equipment with KCL?

Ans: For salt settings, no specific changes are needed. Just a slight increase in quantity may be needed. Like if 4lbs sodium is needed, potassium chloride will be around 4.5lbs.

  • Can potassium be added to the salt tank which already has sodium in it?

Ans: Yes, there is no compatibility issue.

  • Is NaCl as effective as KCl?

Ans: Yes

  • Are there any negative health impacts of potassium chloride?

Ans: Generally no but people who have potassium risk may have a problem.

  • Does KCl remove iron and manganese effectively as sodium?

Ans: Yes

  • Is it good for cats and dogs too?

Ans: Yes

  • What about plants and lawns?

Ans: No problem at all. Potassium is good for plant nutrient. Everything in excess can be harmful so avoid watering too much.

  • What about the fish tank?

Ans: Not a good idea though. Softened water is not recommended for fish tanks.

  • Can it be used in watering house plants?

Ans: Yes, it can be used.

SIMPLE TRICKS FOR SOFTENING HARD WATER WITHOUT A WATER SOFTENER

Do you ever feel dry or itchy after taking a shower and you have to use lotion or moisturizer after showers to avoid itchiness and skin irritation? Does your hair feel rough and tangled after a shower? Does water from your faucets flow in fewer volumes and pressure as it used to when it was new? Do you find spots on glasses and utensils washed in the dishwasher?

Well, if your answer to the above questions was in the affirmative, then you are very much like suffering from a hard water problem. Worry not, however, this should not be considered an epidemic, and you will not be quarantined.

Water is described as “hard water” when it is high in dissolved minerals, primarily calcium and magnesium. The amount of mineral percentage contained in water determines its level of hardness. This water does not make your stomach ache nor is it a health hazard but it is a huge nuisance, and we shall be looking at three simple tricks to soften hard water at home quickly.

SIMPLE WATER SOFTENING BASICS

To make hard water more user-friendly and less irritable, we use water softening machines called water softeners whose price ranges between 600-800 USD for the mid-lower range category. However, here, our primary concern is to save you that extra buck so we will only be needing Washing soda, Detergent booster, and some warm water.

HOW TO MAKE HARD WATER SOFT AT HOME

it is important to remember that water softening is right for you in all aspects; this includes your softer skin, softer hair, brighter colors on laundry after washing, longer lasting heating equipment, not forgetting getting those scum stains off your tile surfaces glassware and utensils.

Step One (for drinking)

  • Bring the water to boil in a pot.
  • Let it boil for some time 10-15 minutes, and white ash-like precipitate mineral residues will be seen at the bottom of the pot
  • Let the water cool to room temperature or Luke-warm depending on your immediate use·
  • Scoop the water from the pot or siphon to leave the precipitate behind.

For drinking purpose, pour the water back and forth from two containers five times to remove air lost to boiling.

Step two (for laundry and general purpose cleaning)

You are going to need –

  • A clean container, preferably one the size of a jug of approximately one-liter capacity
  • Laundry Booster from your local supply shop or find one at Amazon
  • Washing Soda
  1. Add 200 grams of washing soda to the container
  2. Add 100grams of Washing soda to the container
  3. Add warm water to half full in the container

Step three (How to use)

  • Secure the container and shake well until the mix is even and the Laundry Booster and Washing Soda have fully dissolved in the water.
  • Add water to fill the container and shake once more
  • Store and use this mixture in scoops of a cup for every wash load of laundry or general purpose cleaning.

You could always swap the Laundry booster with a scented one for your clothes to give that extra cost-effective fragrance to your clothes.

Conclusion

Did you love this method? If so, leave a comment on your results. Get creative with these easy do it yourself method soften your life with this simple yet effective method. Remember if you want constant flowing soft water you will need to install a system for softening your water. Visit your local plumber for more solutions.